The Perma Ceram Process
The Process is Simple!
Perma Ceram technicians will come to your house and use a spray-on procedure to brighten up almost any bathroom surface which may be dull, worn, or stained. We can give your old worn out bathroom fixtures new life at a fraction of the time and cost of replacement. We guarantee our work for up to five years, and most jobs can be completed in as little as one day. We can apply our finish to a variety of bathroom fixtures such as bathtubs, sinks, and tiles. We can even match existing colors, or change the current colors. Our process seals and gives a like-new shiny, smooth, manageable finish to any fixture.
The Resurfacing Process Includes:
– Stripping (if the fixture has been resurfaced before – only if needed)
– Cleaning/ Acid wash of the surface
– Sanding
– Masking to protect surrounding areas
– Application of 1 primer coat followed by 4 coats of sprayed on epoxy material in your chosen color
– Careful unmasking
– Caulking if and where applicable
While there are chemicals used, rest assured we make sure to take all needed precautions to protect our workers, you, and your home. We use an exhaust system to mitigate as much of the fumes as possible. If there is a window in the room, we use a fan, in cases where there is not a window present, then we use a ventilator with attached hoses to vent outside to the next closest window.
From Start to Finish, we’ve got you covered!
Initiation
It all starts with a call – or email – with our office. Our friendly staff will help determine the best way to tackle your project, and answer any questions you may have.
From there we can provide you with both a verbal and written estimate based on photos and videos, or you can schedule a no cost, no obligation in home estimate with our friendly technicians.
Once confident in our findings, we provide you with flexible options for scheduling that cater to your needs.
Scheduling
We’re dedicated to offering flexibility including weekend and evening appointments with appropriate prior notice.
When scheduling, all details regarding your project will be verified, and a deposit will be taken.
Any paperwork requirements – generally only required for those in co-ops or condominiums – will also be discussed.
After submitting a deposit and confirming details, we will move to the final step – signing our electronic agreement. This paperwork is sent via Docusign and covers all of the expectations for the date of work, as well as helpful information pertaining to aftercare. You can also download a copy of the agreement below if you have any questions!
Pre-Work Checklist
Please ensure the following conditions are met prior to the date of commencement:
– The work area should be free of all personal belongings.
– There should be access to running water.
– Electricity and adequate heating (around 72 degrees) should be available without interruption.
– Any involved third party (tenant/super/homeowner) should be made aware of our arrival.
Date of Work
For most standard bathtub projects, you can expect one technician to complete the entirety of your work the same day.
Your technician may ask that doors remain ajar and windows outside of the bathroom closed to ensure to ventilation process goes smoothly.
For the safety of all, please ensure pets are prevented from entering the working area while technician is present.
Prior to completion, your technician will ask you to look over the work completed and discuss any necessary follow ups.
Post Completion
After your project has been successfully completed, you will be provided with aftercare instructions to ensure the longevity of your bathtub or tile.
Follow us on Facebook